To Start/Stop Operation Mode And To Set The Temperature; Airflow Rate - Daikin FTXF50D2V1B User Reference Manual

5.3.1 To start/stop operation mode and to set the temperature

5.4 Airflow rate

FTXF50~71D2V1B + FTXF50~71A2V1B
Daikin room air conditioner
4P513685-9E – 2021.07
1 Press one or more times to select the operation mode.
Result: The mode will be set in the following sequence:
2 Press to start operation.
Result: is displayed on the LCD.
Result: The operation lamp lights up.
3 Press or on the
temperature.
Note: When using drying or fan only mode, you cannot adjust the temperature.
4 Press to stop operation.
Result: disappears from the LCD.
Result: The operation lamp goes off.
INFORMATION
▪
When using drying operation mode, you CANNOT adjust the airflow rate setting.
▪
The airflow rate in heating mode will lower to avoid generating cold airflow.
When temperature of the airflow rise, operation will continue at the set airflow
rate.
1 Press to choose:
5 airflow rate levels, from " " to " "
Automatic airflow rate operation
Indoor unit quiet operation. When the airflow rate is set to " ",
the noise from the unit will be reduced.
: Unit is operating.
: Operation mode = Automatic
: Operation mode = Drying
: Operation mode = Heating
: Operation mode = Cooling
: Operation mode = Fan only
: Shows the set temperature.
button one or more times to lower or raise the
5 Operation
|
User reference guide
19