To Adjust The Louvers (Vertical Blades); Comfort Airflow Operation; To Start/Stop Comfort Airflow Operation - Daikin FTXF50D2V1B User Reference Manual

5.5.2 To adjust the louvers (vertical blades)

5.6 Comfort airflow operation

5.6.1 To start/stop Comfort airflow operation

FTXF50~71D2V1B + FTXF50~71A2V1B
Daikin room air conditioner
4P513685-9E – 2021.07
2 To use fixed position, press
Result: disappears from the LCD.
1 Hold 1 or both knobs and move the louvers.
a
a Knobs
INFORMATION
When the unit is installed in a corner of a room, the direction of the louvers should
be facing away from the wall. Efficiency will drop if a wall blocks the air.
This operation can be used in heating or cooling operation mode. It will provide a
comfortable wind that will NOT come in direct contact with people. The system
automatically sets the fixed airflow position upward in Cooling and downward in
Heating operation mode.
Cooling operation mode
INFORMATION
Powerful and Comfort airflow operation CANNOT be used at the same time. The last
selected function takes priority. If the vertical automatic swing is selected, Comfort
airflow operation will be cancelled.
1 Press to start.
Result: The flap position will change,
airflow rate is set to automatic.
Mode
Cooling/Drying
Heating
Note: Comfort airflow operation is NOT available in Fan only mode.
when the flap reaches the desired position.
a
Heating operation mode
is displayed on the LCD, and the
Position of flap...
Up
Down
5 Operation
|
User reference guide
21