Table of Contents
Advertisement
6.
Reconnect the whipper outlet hose(s).
7.
Perform a "Powder Rinse" cycle to flush any powder that may have fallen into the
whipper chamber
Installing the Gasket (Seal) and the Impeller
When replacing the gasket, make certain that the small alignment line on the gasket lines up
with the alignment line on the base. If the gasket is not aligned properly, it will take on an
oval shape, causing an improper seal around the shaft resulting in a major leak.
When replacing the impeller, align the small arrow on the impeller with the flat side of the
whipper shaft. Push the impeller until it clicks in place.
VKI Publication #202378-001
(see page
52).
Eccellenza Momentum™
49
- Quick Links:
- Care and Maintenance
- Water System
Hide quick links:
Advertisement
Table of Contents
