Advertisement
Quick Links
1．Scope
This document details the features and usage of the model EM30MSD service plug.
2．Appricable connector
■Service plug
Product Name
EM30MSD
EM30MSD(02)
■Signal connector (GT8E connector)
Product Description
Connector Unit
Electric Terminal
crimp contact
■Signal connector wiring tool
・Automatic Tool
Product description
Main unit
Applicator
・Hand Tool
Product description
Hand Tool
3．Installation
(1) Installing the two small O-rings to the main receptacle.
（The O-rings are necessary for proper operation. Please do not forget to attach them.）
During product assembly, please ensure that there is no unnecessary stress that could tear
or damage the O-rings.
DESCRIPTION OF REVISIONS
COUNT
△
0
TITLE
Instruction manual for EM30MSD
TECHICAL SPECIFICATION
FORM HC0011-9-1
Product Code
CL138-0200-0-00
CL138-0200-0-02
Product Name
GT8E-2S-2C
GT8E-2022SCF
GT8E-2022SCF(01)
GT8B-2428SCF
GT8B-2428SCF(01)
GT8E-2022SC
Product Name
CM-105
AP105-GT8E-2022S
AP105-GT8B-2428S
Product Name
HT-304/GT8E-2022S
O-ring (Attached)
Receptacle
Product Code
CL758-0030-6-00
CL758-0033-4-00
Tin plating /1 reel(10,000 units)
CL758-0033-4-01
Gold plating/1 reel(10,000 units)
CL758-0055-7-00
Tin plating /1 reel(10,000 units)
CL758-0055-7-01
Gold plating/1 reel(10,000 units)
CL758-0101-2-00
Tin plating /1 pack(100 units)
Product Code
CL901-0005-4-00
CL901-5144-8-00
CL901-5172-3-00
Product Code
CL781-0042-6-00
DESIGNED
HIROSE ELECTRIC CO.,LTD.
APPROVED
CHECKED
DESIGNED
WRITTEN
ETAD-C0320-00
Packaging info
Comments
For GT8E-2022SCF
For GT8B-2428SCF
Comments
For GT8E-2022SC
CHECKED
DATE
YH.YAMADA
17.07.18
YH.YAMADA
17.07.18
TY.SUZUKI
17.07.18
TY.SUZUKI
17.07.18
△
1 / 7
0
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for HRS EM30MSD Series
Summary of Contents for HRS EM30MSD Series
- Page 1 1．Scope This document details the features and usage of the model EM30MSD service plug. 2．Appricable connector ■Service plug Product Name Product Code EM30MSD CL138-0200-0-00 EM30MSD(02) CL138-0200-0-02 ■Signal connector (GT8E connector) Product Description Product Name Product Code Packaging info Connector Unit GT8E-2S-2C CL758-0030-6-00 GT8E-2022SCF...
- Page 2 (2) Insert the receptacle into the housing, and install bolts. For this step, use bolts with a pitch of 1.25mm and length 10 to 12mm. During installation, ensure that there is no excessive stress that could tear or damage the O-rings. The recommended dimensions for the receptacle housing panel are shown in figure 1 (below).
- Page 3 3mm so that nothing can fit in between and obstruct operation. (4) Inserting the GT8E connector。 HRS mark facing up Receptacle Panel GT8E connector (lock pin facing up) △...
- Page 4 (5) Attaching the plug As a safety precaution, do not attach the plug until the electric lines have been completely attached. In addition, make sure that the power supply has been turned off and there are no hot-swaps in line with the service plug.
-
Page 5: Electric Shock Warning
４．Precautions when handling Warning Electric shock warning ・This device cannot be used in line with hot-swaps. To ensure operator safety, wear insulating gloves and turn off the power source before disconnecting the plug. When the plug is removed, power flows from the power line to the signal line. When the plug is inserted and locked, power flows from the signal line to the power line.（Sequence order）... - Page 6 ◆How to tell if the plug is fully locked When viewing from the top: (1)The HRS symbol on the plug will rotate 90 degrees from its position when inserted. (2)The receptacle lock symbols are visible through the openings on the plug When viewing from the side: (3)The plug lock indicator( ○...
- Page 7 Warning Power line tension （1）About the recommended tension for the power lines ・When attaching the power lines to the service plug, make sure they are attached in a way such that the connecting terminals do not bear a significant load. Do not let the load on the connecting terminals exceed what is outlined below.
Need help?
Do you have a question about the EM30MSD Series and is the answer not in the manual?
Questions and answers