otometrics Madsen Midimate 602 Quick Manual page 27

MIDIMATE 602 & 622 Diagnostic Audiometers
6. Press Softkey 1, Disable, if MIDIMATE is to be used online to a PC instead of a
printer. Press Softkey 2, Zodiac, to print out via a ZODIAC 901. (This will work
only at 9600 baud.) Press Softkey 3 or 4 to print out via a standard printer. Soft-
key 3, Std.H, is for hardware control with busy high on the DSR line, and Soft-
key 4, Std.L, is for busy low.
7. Press Softkey 2, Format, to display the Select Format menu.
8. Press Softkey 1 or 2 to select A4 format. 1 places the left and right audiograms on
the left and right of the printout respectively. 2 places them in reverse order.
Press Softkey 3 to format printout for 110mm paper.
9. Press Softkey 3, Header, to display the Header menu.
10. Press Softkey 1, Yes, to include a header on each printout containing patient
data and the time and date. To skip this and speed up printout, press Softkey 2,
No.
11. Press Softkey 4, Ths.Log, to display the Threshold Logging menu.
12. Press Softkey 1, Yes, to print out each threshold in a tabular format immediately
after storing. If this is not required, press Softkey 2, No.
13. Press Softkey 5, Avg., to access the Average Values menu.
14. Press Softkey 1, Yes, to include weighted average values on the printout to-
gether with the actual weighting values used. Press Softkey 2, No, to omit these
but include masking values instead (if applicable).
15. Press Menu twice to return the MIDIMATE 622 to normal operation.
27