Telit Wireless Solutions FN980 Design Manual
  1. Manuals
  2. Brands
  3. Telit Wireless Solutions Manuals
  4. Control Unit
  5. FN980
  6. Design manual
Telit Wireless Solutions FN980 Design Manual

Telit Wireless Solutions FN980 Design Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

FN980 FAMILY TLB
HW Design Guide
1VV0301651 Rev. 2 – 2021-02-24
Mod.0818 2017-01 Rev.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FN980 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Telit Wireless Solutions FN980

Summary of Contents for Telit Wireless Solutions FN980

  • Page 1 FN980 FAMILY TLB HW Design Guide 1VV0301651 Rev. 2 – 2021-02-24 Mod.0818 2017-01 Rev.0...

  • Page 2: Notice

    FN980 Family TLB HW Design Guide SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE NOTICE While reasonable efforts have been made to assure the accuracy of this document, Telit assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information obtained herein.

  • Page 3: Usage And Disclosure Restrictions

    FN980 Family TLB HW Design Guide USAGE AND DISCLOSURE RESTRICTIONS License Agreements The software described in this document is the property of Telit and its licensors. It is furnished by express license agreement only and may be used only in accordance with the terms of such an agreement.

  • Page 4: Applicability Table

    FN980 Family TLB HW Design Guide APPLICABILITY TABLE PRODUCTS FN980 - 3G / 4G / 5G Sub-6 cellular module FN980m - 3G / 4G / 5G Sub-6 / 5G mmWave cellular module 1VV0301651 Rev. 2 Page 4 of 38 2021-02-24...

  • Page 5: Table Of Contents

    FN980 Family TLB HW Design Guide Contents NOTICE COPYRIGHTS ....................2 COMPUTER SOFTWARE COPYRIGHTS ............2 USAGE AND DISCLOSURE RESTRICTIONS ..........3 APPLICABILITY TABLE ................4 CONTENTS ....................5 INTRODUCTION ................7 Scope ................... 7 Audience..................7 Contact Information, Support ............7 Text Conventions ................
  • Page 6 FN980 Family TLB HW Design Guide CHANGE LIST ................34 SAFETY RECOMMENDATIONS..........35 READ CAREFULLY ..............35 ACRONYMS ................36 DOCUMENT HISTORY .............. 37 1VV0301651 Rev. 2 Page 6 of 38 2021-02-24...

  • Page 7: Introduction

    FN980 Family TLB HW Design Guide 1. INTRODUCTION Scope This scope of this document is to describe the FN980 Family TLB which is part of complete FN980 Family Development Kit (Dev-Kit) Audience This document is intended for Telit customers, especially system integrators, about to implement their applications using the Telit module.

  • Page 8: Text Conventions

    FN980 Family TLB HW Design Guide Text Conventions Danger – This information MUST be followed or catastrophic equipment failure or bodily injury may occur. Caution or Warning – Alerts the user to important points about integrating the module, if these points are not followed, the module and end user equipment may fail or malfunction.

  • Page 9: Related Documents

    FN980 Family TLB HW Design Guide Related Documents FN980 FAMILY HW User Guide, 1VV0301603 • FN980 Family Pinout, 80624ST10993A • Telit EVB (Evaluation Board) User Guide, 1VV0301249 • • FN980 Family AT Commands Reference Guide, 80624ST10996A 1VV0301651 Rev. 2 Page 9 of 38 2021-02-24...

  • Page 10: General Product Description

    GND via’s. The board is designed to accommodate new modules according FN980 Family M.2 (50 x 30.00 x 3.40mm, +/- 0.15 mm tolerance and 75 pins) updated pin mapping.

  • Page 11: Tlb View

    FN980 Family TLB HW Design Guide TLB View The below pictures show the TLB top and bottom view. FN980 (L) / FN980m (R) TLB Top View FN980 (L) / FN980m (R) TLB Bottom View 1VV0301651 Rev. 2 Page 11 of 38...

  • Page 12: Jumper Setting Guidelines

    FN980 Family TLB HW Design Guide Jumper Setting Guidelines 2.3.1. Default Jumper Setting of TLB Jumper Jumper Type Set Position Description PL214 2.54 mm Auto Power ON PL301 2.54 mm 3.3V PCIe/USB PL302 2.54 mm 3.3V PCIe/USB PL216 2.54 mm Enable Audio Function 1VV0301651 Rev.

  • Page 13: Jumper Description

    Jumper Description (1) When using TGPIO_05 as I2S_CLK (Default) The I2S function can be evaluated using the audio codec implemented in EVB. Check out the AT#DVI section of the FN980 Family AT Commands Reference Guide. 1VV0301651 Rev. 2 Page 13 of 38...
  • Page 14 - 3.3V power is supplied to the USB switch block, so USB 3.1 gen2 can be supported by using Type C connector. - When FN980 family operates as PCIe EP, it can be supplied VBATT from host through SO301. (5) W_DISABLE_N 1VV0301651 Rev.
  • Page 15 Check out the AT#PSMWDISACFG section of the FN980 Family AT Commands Reference Guide. (6) Auto Power ON (Default) If PL214 1-2 is connected by jumper, then FN980 will be automatically powered on when the VBATT is supplied. 1VV0301651 Rev. 2...

  • Page 16: Antenna Ports

    FN980 Family TLB HW Design Guide Antenna Ports Information – For more detail information of Antenna ports, please refer to FN980 Family HW User Guide, 1VV0301603, Chapter 7.1 Antenna Interface. Caution – Be careful cables and RF connectors assembly not to damage when Antenna cables for LTE/FR1/FR2/GNSS are connected.

  • Page 17: Qtm525 Mmwave Antenna Module Assembly For Fn980M

    FN980m IF connector table, and connect 2in1 IF cable carefully Black one to IF-H and White one to IF-V. Users who want to customize 2in1 IF cable, please refer to 1VV0301603 FN980 Family HW User Guide, Chapter 7.3.2 Cable for mmWave IF.

  • Page 18: Pcie

    Please refer to AT#USBPCISWITCH section of the FN980 Family AT Commands Reference Guide for more details. And set the jumper as shown below. Now FN980 family will operated as PCIe EP by connecting it to the host using an extension cable. 1VV0301651 Rev. 2...
  • Page 19 FN980 Family TLB HW Design Guide If you want to use USB as a network interface again, just disable the USB/PCIe function, or move the jumper as shown below and reboot the module. For technical supports and questions about PCIe interface, contact Telit Technical Support at: TS-EMEA@telit.com...

  • Page 20: Root Complex

    Root Complex Since FN980 is made according to the m.2 card standard, it basically operates as EP. If you want to run FN980 as RC using PCIe 64pin connector, you need to move 4 optional resistors referring to the figure below.
  • Page 21 FN980 Family TLB HW Design Guide For technical supports and questions about PCIe interface, contact Telit Technical Support at: TS-EMEA@telit.com • TS-AMERICAS@telit.com • TS-APAC@telit.com • TS-SRD@telit.com • 1VV0301651 Rev. 2 Page 21 of 38 2021-02-24...

  • Page 22: Guidance For Evaluation Board

    FN980 Family TLB HW Design Guide Guidance for Evaluation Board The EVB can be configured for different power supply sources depending on the required use case. Information – For more detail information of power supply source selection, please refer to 1VV0301249 Telit Evaluation Board (EVB) HW User Guide, Chapter 3.1 Supply Source Selection.

  • Page 23: Bypass Setting

    FN980 Family TLB HW Design Guide 2.7.1. Bypass Setting Power Supply Requirement Voltage / Max.Current 3.3 V ± 5 % / 3 A Information – Need to set to over 6A in case of NR FR1 Power Class 2.7.1.1. Jumper Setting for Bypass Mode PL106/2-3 1VV0301651 Rev.

  • Page 24: 6-15V Setting

    FN980 Family TLB HW Design Guide 2.7.2. 6-15V Setting The EVB main power connector is PL101/SO101 with an input range of 6-15V. It can be using via power supply or power adaptor. 2.7.2.1. Guidelines of ECO for 3.3V output Step 1 •...
  • Page 25 FN980 Family TLB HW Design Guide Step 2 • Power source by SMPS down convertor (set-point 3.9V, Default setting) fed from PL101/SO101 In order to change 3.3 V output for FN980 family module, MUST change R107 resistor which is general 0402 1.69 K ohm resistor.

  • Page 26: Sdk Overview

    For such a reason, users who want to use USB interface MUST USB C type connector which is in TLB. The USB connector which is in TELIT EVB is not supported on FN980 Family. 1VV0301651 Rev. 2 Page 26 of 38...
  • Page 27 FN980 Family TLB HW Design Guide SIM Card You can use the SIM 1 Socket on the top interface board. Power ON To Power-ON the Telit module, connect an AC adaptor or power supply (3.3 V). Power OFF To Power-OFF the Telit module, unplug an adaptor or turn-off the power supply.
  • Page 28 FN980 Family TLB HW Design Guide *USB Type-C FN980 Family supports USB 3.1 GEN2 interface. USB connector of Telit Evaluation Board does not support 10 Gbit/s. Must use USB Type-C connector which is located in TLB of FN980 Family. AT Commands /...

  • Page 29: Component Assembly Diagram

    FN980 Family TLB HW Design Guide 3. COMPONENT ASSEMBLY DIAGRAM Layout Component Diagram Top View 1VV0301651 Rev. 2 Page 29 of 38 2021-02-24...
  • Page 30 FN980 Family TLB HW Design Guide Component Diagram Bottom View SUB PCB Component Diagram Top View 1VV0301651 Rev. 2 Page 30 of 38 2021-02-24...

  • Page 31: Schematics

    FN980 Family TLB HW Design Guide 4. SCHEMATICS 1VV0301651 Rev. 2 Page 31 of 38 2021-02-24...
  • Page 32 FN980 Family TLB HW Design Guide 1VV0301651 Rev. 2 Page 32 of 38 2021-02-24...
  • Page 33 FN980 Family TLB HW Design Guide Information – For a higher resolution picture of schematic, please contact Telit technical support as below. TS-EMEA@telit.com  TS-AMERICAS@telit.com  TS-APAC@telit.com  TS-SRD@telit.com  1VV0301651 Rev. 2 Page 33 of 38 2021-02-24...

  • Page 34: Change List

    Used with the FN980 alpha’/alpha’’ module.(CS2067A/CS2067B) Module size is 30 * 50 mm which is same as latest sample. CS2064D Used with the FN980 alpha2 module or later (CS2067C – CS2067J) M.2 Pin-out is changed for supporting mmWave control. (Same as latest sample.) mmWave connector is added.

  • Page 35: Safety Recommendations

    FN980 Family TLB HW Design Guide 6. SAFETY RECOMMENDATIONS READ CAREFULLY Be sure the use of this product is allowed in the country and in the environment required. The use of this product may be dangerous and has to be avoided in the following areas: •...

  • Page 36: Acronyms

    FN980 Family TLB HW Design Guide 7. ACRONYMS Evaluation Board Translation Board Interface Board IFBD Universal serial bus Subscriber Identification Module Thermal Interface Material Printed Circuit Board Engineering Change Order Software Development Kit 1VV0301651 Rev. 2 Page 36 of 38...

  • Page 37: Document History

    FN980 Family TLB HW Design Guide 8. DOCUMENT HISTORY Revision Date Changes 2020-02-28 First draft 2020-08-13 Name changed to FN980 Family Modified typos 2021-02-24 Newest FN980 Family TLB (CS2064F) updated Section 2.3 – Added Jumper Setting Guidelines Section 2.6 – Added PCIe section Section 5 –...
  • Page 38 Mod.0818 2017-01 Rev.0...

Table of Contents