Table of Contents
Advertisement
SAFETY PRECAUTIONS
WORK ENVIRONMENT
• Keep the work area clean and tidy.
• Dress appropriately - Do not wear loose clothing or jewellery. Tie long hair
out of the way.
• Keep children and visitors away - Do not let children handle the sander.
Make sure that any other persons in the work area are dressed suitably
and are wearing eye and ear protectors.
• Keep the air supply hose away from heat, oil and sharp edges.
• Do not fit the sander to any stand or clamping device that may damage
the tool.
GENERAL USE
• Stay alert and use common sense - do not use the sander when you are
tired or under the influence of alcohol, drugs or medication.
• Always wear eye protection when using the sander - eye protection must
provide protection from the front and the side.
• Always wear a dust mask when sanding dusty materials.
• Always wear ear protectors when using the sander.
• Do not over-reach - Keep proper footing and balance at all times.
• Never use any type of bottled gas as a source of power for the sander.
• Do not connect the air supply hose with your finger on the trigger of the
sander.
• Do not exceed the maximum pressure for the sander: 90 psi / 6.2 bar.
• Check hoses for leaks or worn condition before use and ensure that all
connections are secure.
• Do not use the sander for any other purpose than that described in this
booklet.
• Do not carry out any alterations or modifications to the sander.
• The sander should be serviced as required by your CLARKE dealer.
• Never use the sander if it is defective or operating abnormally.
• ALWAYS ensure the workpiece is firmly secured leaving both hands free to
control the sander.
• ALWAYS ensure the sander has stopped before putting it down after use.
Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com
4
Advertisement
Table of Contents
