Table of Contents
Advertisement
SDT 5000 User Manual
10. HOW TO USE THE SCREENS
10.1 Basic Screen Components
The user can interact locally with the SDT 5000 through a set of screens accessible through the
TEST port. While the function and form of the screens can vary greatly, every screen was
designed to operate in exactly the same way. This consistency means that a user need only learn a
small set of commands to get maximum usefulness out of an SDT 5000. In addition, every screen
has some common components that are illustrated in
Screen 3 below.
SELECTION1 SELECTION2 SELECTION3
Information field
STATUS LINE
LINE
Screen 3 - Basic screen components.
10.1.1 TITLE BAR
A screen's Title Bar consists of the top two lines on the screen. The first line displays
company name, copyright and product name and current mode. The second line displays the
title of the current screen. Examples include: Transparent, AT, NP. The Title Bar is displayed
using reverse video characters.
10.1.2 SELECTION BAR
The Selection Bar has all the valid commands the user may choose on the current screen. The
user may type the selection in the Select Field or select the command from the Selection Bar
by advancing the cursor using <TAB> or using one of the arrow keys. Once the selection is
highlighted the user can execute the command by typing <ENTER>. The selections in the
Selection Bar are the same as the commands in the Select Field.
Version 1.1, 03/24/06
SDT 5000 (MODE) – Wireless Matrix Corp. (C) 2006
SCREEN TITLE
Display field 1 label (units)
Display field 1 label (units)
1. Edit field 1 label (units)
2. Edit field 2 label (units)
3. Menu field 1 label
4. Menu field 2 label
5. Confirmation field label?
| STATUS LINE | STATUS LINE | STATUS LINE | STATUS
Document MBUD-0109v11
11
22
33
44
Select:
Page 47
Advertisement
Table of Contents
