Table of Contents
Advertisement
Setting the Camera
Audio
— Audio Menu
When you click
Audio
Audio menu appears.
Use this menu to set the audio functions of the camera.
The Audio menu consists of the Audio tab.
Audio Tab
Send
Notes
• No audio is output to the SDI connector.
• No audio is output if the Plug-in free viewer is used.
Enable
Select the checkbox if you want to send audio from the
camera.
Note
When you check the Enable, click Refresh on the Web
browser to reflect the change on the opening live viewer
page.
Setting
Make settings for sending audio.
Auto gain control
Controls the audio input level to a suitable volume level
automatically.
Equalizer
Uses to change the frequency response of audio in
accordance with its use environment.
Off: Disable the equalizer setting.
Low cut: Reduces the noise from air conditioners and a
projector, etc., and cuts low-frequency.
Voice enhancement: Enhances the voice clearly,
cutting low- and high-frequency.
28
Setting the Camera Audio — Audio Menu
in the Administrator menu, the
Input selection
Select microphone input or line input.
Mic volume
When the Audio in is set to microphone input, set the
volume level of the audio input from the microphone
input connector. It is adjustable from –10 to +10.
Audio codec
Select the codec type for sending audio. The bit rate may
differ, depending on the codec type.
OK/Cancel
See "Buttons common to every menu" on page 19.
Advertisement
Table of Contents
