Using The Remote Control - Dometic Harrier Plus HP36H401RI Operating Manual

Operating the roof air conditioner Harrier series
7.2

Using the remote control

4
1
AUTO
The remote control must be pointed at the IR receiver (1) on the control panel during
operation.
➤ Press a button.
✓ The value is transmitted directly to the roof air conditioner.
✓ The roof air conditioner confirms the receipt of data with a high note.
Switching only the remote control to or from stand-by
In stand-by mode, the remote control display is inactive.
If the remote control is not pointing to the IR receiver on the control panel, you can
activate the remote control or switch it to stand-by independently from the roof air
conditioner:
➤ Press the
button.
a
14
EN