Activating The Sleep Function - Dometic Harrier Plus HP36H401RI Operating Manual

Operating the roof air conditioner
✓ The switch-on time is set on the roof air conditioner.
The roof air conditioner is switched on with the selected air conditioning mode
at the specified time.
✓ The OFF symbol flashes on the display of the remote control.
If no OFF time is needed press the
➤ Use the + or – button to set the number of hours until the air conditioner will be
switched to stand-by.
➤ Press the
button again to confirm the value.
✓ The switch-off time is set on the roof air conditioner.
Switch the roof air-conditioner to Stand-by.
Cancelling timer settings
If you have set the timer, you can cancel these settings as follows:
➤ Press the
button once.
✓ The timer symbol disappears.
✓ The setting has been cancelled.
7.10

Activating the sleep function

I
NOTE
The sleep function is only available in "Cooling" (
modes.
When the sleep function is activated, the compressor speed and the fan speed is
limited to a lower level to reduce the noise levels for easier sleeping.
➤ Set the required temperature (see chapter "Setting the temperature" on
page 16).
➤ Press the
button.
✓ The
symbol appears in the display.
The sleep function is activated.
➤ To deactivate the sleep function press the
I
NOTE
The sleep function is deactivated if the MODE button is pressed.
18
button again without changing the hour value.
button again.
Harrier series
) or "Heating" ( )
a
EN