Hints For Improved Use; Switching The Roof Air Conditioner On And To Stand-By; Selecting The Air Conditioning Mode; Selecting The Fan Setting Manually - Dometic Harrier Plus HP36H401RI Operating Manual

Air conditioning roof unit
Hide thumbs Also See for Harrier Plus HP36H401RI:
Table of Contents

Advertisement

Harrier series
7.3

Hints for improved use

The following hints will optimise the performance of your roof air conditioner:
• Improve the heat insulation of your vehicle by sealing gaps and hanging reflective
blinds or curtains on your windows.
• If the vehicle has been subjected to direct sunlight for a long time: Operate the
roof air conditioner in the "Ventilation" (
while before switching on the "Cooling" (
• Avoid opening doors and windows as far as possible in the "Cooling" (
mode.
• Align the air nozzles sensibly.
• Make sure the air nozzles and intake grille are not covered by cloths, paper or
other objects.
7.4

Switching the roof air conditioner on and to stand-by

I
NOTE
• When roof air conditioner is switched on, it begins to condition the
air to the values that were set most recently.
• The roof air conditioner can be switched off only by cutting mains
power.
• You can use the remote control or the control panel to switch it on or
to stand-by
➤ Press the
button.
✓ The roof air conditioner is switched on.
➤ Press the
button again to switch to stand-by.
7.5

Selecting the air conditioning mode

➤ Select the desired air conditioning mode using the MODE button, see chapter
"Air conditioning modes" on page 11.
✓ The roof air conditioner confirms the receipt of the values with a high note.
✓ The roof air conditioner is switched to the selected air conditioning mode.
7.6

Selecting the fan setting manually

The fan controls the strength of the air supply.
EN
Operating the roof air conditioner
) mode with the windows open for a
) air conditioning mode.
)
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents