Daikin FCAHG71HVEB Installer And User Reference Manual page 48

8 | Commissioning
Installer and user reference guide
48
#
3 Turn ON power for at least 6 hours before starting operation to
protect the compressor.
4 On the user interface, set the unit to cooling operation mode.
2 Start the test run
#
1 Go to the home menu.
2 Press at least 4 seconds.
3 Select Test Operation.
4 Press.
5 Press within 10 seconds.
3 Check operation for 3 minutes.
4 Check operation of the airflow direction (only applicable for indoor units with
swing flaps).
#
1 Press.
2 Select Position 0.
3 Change the position.
4 Press.
Action
Action
The Service Settings menu is
displayed.
Service Settings
Test Operation
Maintenance Contact
Field Settings
Demand
Min Setpoints Differential
Group Address
Test Operation is displayed on
the home menu.
Test Operation
Test run starts.
Action
Air Volume/direction
Air Volume/direction
If the airflow flap of the indoor
unit moves, operation is OK.
If not, operation is not OK.
The home menu is displayed.
Result
Cool
Set to
28
°C
1/3
Return Setting
Cool
Return Setting
Result
Air Volume Direction
Low
Position 0
Return Return Setting Setting
Air Volume Direction
Low Position 0
Return Return Setting Setting
FCAHG71~140HVEB
Split system air conditioners
4P561449-1B – 2021.07