Installation; Overview: Installation; Mounting The Indoor Unit; Precautions When Mounting The Indoor Unit - Daikin FCAHG71HVEB Installer And User Reference Manual

6 |

Installation

6 Installation

6.1 Overview: Installation

6.2 Mounting the indoor unit

6.2.1 Precautions when mounting the indoor unit

Installer and user reference guide
28
This chapter describes what you have to do and know on-site to install the system.
Typical workflow
Installation typically consists of the following stages:
1 Mounting the outdoor unit.
2 Mounting the indoor unit (+ decoration panel).
3 Connecting the refrigerant piping.
4 Checking the refrigerant piping.
5 Charging refrigerant.
6 Connecting the electrical wiring.
7 Finishing the outdoor installation.
8 Finishing the indoor installation.
INFORMATION
This chapter only describes installation instructions specific to the indoor unit. For
the other instructions, see:
▪
The installation manual of the outdoor unit
▪
The installation manual of the user interface
▪
The installation manual of the decoration panel
NOTICE
After installing the decoration panel:
▪
Make sure there is no gap between the unit body and the decoration panel.
Possible consequence: Air might leak and cause dew drop.
▪
Make sure no oil remains on the plastic parts of the decoration panel. Possible
consequence: Degradation and damage of plastic parts.
INFORMATION
Also read the precautions and requirements in the following chapters:
▪
General safety precautions
▪
Preparation
FCAHG71~140HVEB
Split system air conditioners
4P561449-1B – 2021.07