Table of Contents
Advertisement
Voltage: 100-240V / 50/60Hz
LEDs: x2 110W CREE COB LEDs
Color Temperature: 2700K (1200K Tungsten Mode)
IP Rating: IPX4
Working Position: Any Safe Working Position
Power Draw: 235W
Power Linking: 4 Fixtures Max @120V | 8 Fixtures Max @240V
Fuse: 1A
DMX Channels: 6 DMX Channel Modes 1 / 2 / 2A / 3 / 4 / 6
Connections: 5pin DMX and Locking Power Cable In/Out
Control: RDM (Remote Device Management)
Weight: 15 lbs. (6.8kg)
Dimensions (LxWxH): 15.7" (400mm) x 7.9" (200.5mm) x 8.5" (215.5mm)
Dimensions w/Bracket (LxWxH): 15.7" (400mm) x 7.9" (200.5mm) x 10.4" (264mm)
Dimensions w/Yoke (LxWxH): 19.8" (503mm) x 7.9" (200.5mm) x 12.8" (325.3mm)
Warranty: 2 Years (730 Days)
Specifications and improvements in the design of this unit and this manual are subject to change without notice.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condi-
tions: (1) this device may not cause harmful interference, and (2) this device must accept any inter-
ference received, including interference that may cause undesired operation.
FCC RADIO FREQUENCY INTERFERENCE WARNINGS & INSTRUCTIONS
This product has been tested and found to comply with the limits as per Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a resi-
dential installation. This device uses and can radiate radio frequency energy and, if not installed and
used in accordance with the included instructions, may cause harmful interference to radio commu-
nications. However, there is no guarantee that interference will not occur in a particular installation.
If this device does cause harmful interference to radio or television reception, which can be deter-
mined by turning the device off and on, the user is encouraged to try to correct the interference by
one or more of the following methods:
•
Reorient or relocate the device.
•
Increase the separation between the device and the receiver.
•
Connect the device to an electrical outlet on a circuit different from which the radio receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
SPECIFICATIONS
FCC STATEMENT
23
Advertisement
Table of Contents
