Table of Contents
Advertisement
Addr: DMX-512 Address Setting.
Select "Addr," then press the ENTER button. When the display begins to blink, use the DOWN and
UP buttons to change the DMX-512 address (001-512). Once the address has been selected, press
the ENTER button to confirm, or press the MENU button to exit without making any change. The
system will return to the main menu after 8 seconds of inactivity.
ChNd: Channel Mode.
Select "ChNd," then press the ENTER button. Use the DOWN and UP buttons to select the channel
mode from the following options:
•
1-Channel Mode
•
2-Channel Mode
•
2A-Channel Mode
•
3-Channel Mode
•
4-Channel Mode
•
6-Channel Mode
Once you have made your selection, press the ENTER button to confirm, or exit to the main menu
without making any changes by pressing the MENU button. The system will return to the main menu
after 8 seconds of inactivity.
dINd: Dimmer Curve.
Select "dINd," then press the ENTER button. Use the DOWN and UP buttons to select from the fol-
lowing dimmer curves:
•
Standard
•
Stage
•
TV
•
Architec
•
Theatre
•
Stage2
Once you have made you selection, press the ENTER button to confirm, or press the MENU but-
ton to exit without making any changes. The system will return to the main menu after 8 seconds of
inactivity.
Und: Tungsten Filament Effect.
Select "Und," then press the ENTER button. Use the DOWN and UP buttons to select "on" or "off."
Once you have made your selection, press the ENTER button to confirm, or press MENU to exit
without making any changes.
dNSt: DMX State.
Select "dNSt," then press the ENTER button. Use the DOWN and UP buttons to select from the fol-
lowing options:
•
"bLNd": Blackout
•
"HoLd": Hold last state
•
"NAnd": Manual mode
Once you have made your selection, press the ENTER button to confirm, or press MENU to exit
without making any changes.
SYSTEM MENU
19
Advertisement
Table of Contents
