Remove Point (Route Menu); Reverse (Route Menu); New Route (Route Menu); Load Route (Route Menu) - Garmin MDFlight Quick Start Manual

4.31 Remove point (Route menu)

Opens the list of points in your route to remove one.

4.32 Reverse (Route menu)

Reverses the current route.

4.33 New Route (Route menu)

Clears the current route and opens the list of personal point to add one.
You can exit this list if you have to add a non-existing NAVAID or FIX.

4.34 Load Route (Route menu)

Displays the list of previously saved routes to choose one to be loaded.

4.35 Save Route (Route menu)

Saves the current route. There are 12 slots available. You can either replace
an existing one or save to a new one if slots are still available.

4.35 Import Route (Route menu)

You can import .fpl and .gpx files in the web companion and then use this
menu to import it in the app. If you decide to save it after import, the name
will be pre-populated with the route name found during the import.

4.36 Stop Nav (Route menu)

Stops the navigation and remains on the existing destination.
4.37 Nav Cue (Nav menu)
Displays a small yellow triangle that indicates the direction you should
take to navigate to active point. Triangle at "noon" position on the watch
indicates you are flying straight to the point.