Kenwood KWL90 Instructions Manual page 6

Know Your Kenwood Stand Mixer
Congratulations on buying a Kenwood. With such a wide range of attachments available,
it is more than just a mixer. It is a state-of-the-art Stand Mixer. We hope you will enjoy it.
Robust. Reliable. Versatile. Kenwood.
Safety
Read these instructions carefully and retain for
future reference.
Remove all packaging and any labels.
If the plug or cord is damaged it must, for safety
reasons, be replaced by Kenwood or an authorised
Kenwood repairer in order to avoid a hazard.
Switch off and unplug before fitting or removing
tools/attachments, after use and before cleaning.
Keep your fingers away from moving parts and fitted
attachments.
Never leave the Stand Mixer unattended when it is
operating.
Never use a damaged appliance. Get it checked or
repaired: see 'Service and Customer Care' section.
Never operate the Stand Mixer with the head in the
raised position.
Never let the cord hang down where a child could
grab it.
Never let the power unit, cord or plug get wet.
Never use an unauthorised attachment or more than
one attachment at once.
Never exceed the maximum quantities and speeds
stated in the Recommended Usage Chart.
When using an attachment, read and follow the
safety instructions that are supplied with it.
Take care when lifting this appliance as it is heavy.
Ensure the head is correctly latched in the down
position and that the bowl, tools, outlet covers and
cord are secure before lifting.
When moving the appliance always pick up by the
pedestal base and mixer head. Do not lift or carry
the appliance by the bowl handle.
Take care when removing bowl tools after extended
use as they may get hot.
901603 G20M 2