fantastic furniture Havana Lowline Medium Manual page 5

Step 1
You will need
18 x Cam Bolts
Phillips Head
(H3)
Screwdriver
H3
Attach 10 x Cam Bolts (H3) into Top Panel (P1).
Attach 8 x Cam Bolts (H3) into Legs (P7,P8,P9,P10).
Tighten Cam Bolts using a Phillips Head Screwdriver
Step 2
You will need
4 x Cam Bolts
Phillips Head
(H3)
Screwdriver
Attach 2 x Cam Bolts (H3) into Dividers (P3) using a Phillips Head Screwdriver.
Repeat Step 2 for Right Divider (P4).
Step 3
You will need
4 x Small
4 x Cam Nuts
Dowels (H2)
(H4)
Phillips Head
Screwdriver
Insert 4 x Small Dowels (H2) and 4 x Cam Nuts (H4) into Shelf Panel (P6) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Dividers (P3, P4) to Shelf Panel (P6),
then tighten the cam nuts using a Phillips Head Screwdriver.
fantasticfurniture.com.au
H3
H3
H3
H3
H2
H3
H3
H3
(P1)
H3
H3
(P3)
(P6)
H2
H4
H4
(P3)
H3
H3
H3
H3
(P8)
H3
H3
(P10)
Make sure raw edge
is facing up.
(P4)
H4
This is how a cam nut works........
H3
H3
(P7)
H3
H3
(P9)
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Page 5