fantastic furniture COMO TV Stand Manual page 6

Step 3
You will need
4 x Cam Nuts Flat head
(H3) screwdriver
This is how a cam nut works ........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert 4 x Cam Nuts (H3) into the holes of Shelf Panel (P2) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Side Panels (P3, P4) to Shelf Panel (P2),
then tighten the cam nuts using a Flat head screwdriver.
Step 4
You will need
4 x Dowels
(H1)
Insert 4 x Dowels (H1) into Side Panels (P3, P4).
Put Dividers (P5) to the place as shown.
www.fantasticfurniture.com.au
(P4)
(P5)
H1
H1
(P4)
(P2)
H3
H3
H1
(P3)
H3
H3
(P3)
(P5)
H1
PAGE 6