Honeywell HUS-NVR-1032/6032-E User Manual page 87

Figure 5-101 RAID List
Manually Create RAID (existed only when the RAID list is empty)
1. Click Manually Create RAID in the "RAID" window, the following window is displayed
Figure 5-102 Manually Create RAID
2. Input the name of RAID, select the type of RAID and select the target disks
3. Click OK, the manually created RAID will be listed in the "RAID" window.
Add RAID
When the first RAID is created, the RAID window will be different from the original one and
an Add button appeared, as shown in
Click Add, and the window of "Manually Create RAID" is popped-up. Refer to
Create RAID for detailed operations
Manually Rebuild
Only when the status of the RAID is "Degrade", the RAID can be manually rebuilt.
To manually rebuild a RAID, you must select the disk with the same size of
the RAID or larger size.
1. Select the target RAID, click Manually Rebuild and the following window is displayed:
Figure 5-101.
Manually
79