Honeywell HUS-NVR-1032/6032-E User Manual page 64

System Operation and Configuration
56
Figure 5-49 Alarm Log-Menu
"Configure Trigger Profiles", see the
"Configure System Alarm", see the
Select "Export" to export the target log to the external USB device or click "Remove All" and
the below window is displayed:
Figure 5-50 Remove All Alarm Log
Click OK to remove all alarm log.
Input Alarm Log
Navigate to View Log Alarm Log Input Alarm Log on the Live screen to
view the input alarm log as shown in the following figure:
"Trigger Profiles" section on page 62;
"System Alarm" section on page 76;