Page 1
WESTCOTT BEDSTEAD PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction. Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not destroy any of the packaging until you are certain that you have all the necessary parts for the assembly.
Page 2
Fittings Checklist HARDWARE NEEDED FOR BED ASSEMBLY (PACK A) Code Description Code Description Bolts (M8x30mm) for Flat Washers (for M8 bolts) fitting side rails (3) to headboard & footboar d (1&2) Spring Washers (for M8 bolts) Allen Key (for M8 bolt) HARDWARE FOR FITTING WOOD SLATS OR UPGRADED SPRUNG SLAT FRAME (PACK B) Code Description...
Page 3
Stage Bed Assembly - Use Pack 'A' Stage & & 10mm 100% Page 3 of 5...
Page 4
Fitting Wooden Slat Set - Use Pack 'B' Stage Carefully lay the wooden slat set (5) on the metal supports, on each side panel. iii) Adjustable foot Page 4 of 5...
Page 5
Fitting Sprung Slat Frame - Use Pack 'B' Stage Page 5 of 5...
Need help?
Do you have a question about the WESTCOTT BEDSTEAD and is the answer not in the manual?
Questions and answers