Related Manuals for DREAMS Westbrook Bunk
Summary of Contents for DREAMS Westbrook Bunk
- Page 1 Westbrook Bunk IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY ! 3/4 hour approx Two person assembly time assembly...
-
Page 2: Assembly Tips
To keep your little ones busy, there is a colouring page inside the back cover. Help and support At Dreams, it’s our mission to give the whole nation a great night’s sleep - this means that the quality of our products is of utmost importance to us. If there are any issues with your product or any missing parts, please contact our Help Centre on 0800 652 6750, where a member of our team will be happy to help. -
Page 3: Parts List
Protect Frame x 1 pc Upper Head/Foot End x 2 pcs Ladder x 1 pc Upper Side Rail x 1 pcs Upper Inside Frame x 1 pcs Metal Slat x 48 pcs Westbrook Bunk - Assembly Guide - Page 3... -
Page 4: Tools Required
Bolt (M6 x 20mm) Bolt (M6 x 15mm) Allen Key Slat Buckle G x 9 Caps (Dia 17mm) Caps (Dia 10mm) 10 10 Tools required Please check you have all these below: Scissors Tape measure Westbrook Bunk - Assembly Guide - Page 4... - Page 5 Attach Base Leg (01) to Upper Head/Foot End (03). Make sure these tubes on the same side. HEAD/FOOT END ASSEMBLY Attach Lower Head/Foot End (02) to Base Leg (01). Fully tighten all bolts. Westbrook Bunk - Assembly Guide - Page 5...
-
Page 6: Side Rail Assembly
SIDE RAIL ASSEMBLY Attach Lower Side Rails (06) (07) to headend/Footend. Loosely tighten the Bolts 90%. SIDE RAIL ASSEMBLY Attach the Upper Side rail (04) to headend/Footend. Loosely tighten the Bolts 90%. Westbrook Bunk - Assembly Guide - Page 6... - Page 7 SIDE RAIL ASSEMBLY Attach Upper Inside Frame (05) to headend/Footend. Fully tighten all bolts at this step. SLAT SYSTEM ASSEMBLY Insert metal slats and secure with plastic buckle to the side rails. Westbrook Bunk - Assembly Guide - Page 7...
- Page 8 Before ASSEMBLY the Protect frame and ladder, you must deciede which side you want to fit the ladder to. Option: 01 The ladder on the right side, The protect frame on the left side Westbrook Bunk - Assembly Guide - Page 8...
- Page 9 PROTECT FRAME AND LADDER ASSEMBLY Press and attach the Metal slats with plastic buckles into the side rails Option: 02 The ladder on the left side, The protect frame on the right side Westbrook Bunk - Assembly Guide - Page 9...
-
Page 10: Bed Frame Assembly
Assembly Assembly PROTECT FRAME AND LADDER ASSEMBLY Option: 02 The ladder on the left side, The protect frame on the right side BED FRAME ASSEMBLY Insert Cap into hole. Westbrook Bunk - Assembly Guide - Page 10... - Page 11 (e.g. cupboards) and the like. To avoid risk of serious injury the distance between the top safety barrier and the adjoining structure shall not exceed 75mm or shall be more than 230 mm. • WARNING: Do not use the bunk bed/high bed if any structural part is broken or missing. Westbrook Bunk - Assembly Guide - Page 11...
-
Page 12: Care And Maintenance
Metal tends to be more resilient to everyday wear and tear. We recommend to gently dust your metal furniture and keep it dry to maintain its look. Thank you for shopping with us - we hope you have a great night's sleep Westbrook Bunk - Care and maintenance - Page 12... - Page 13 Little dreamers Keep the little ones entertained while you assemble your new purchase.
Need help?
Do you have a question about the Westbrook Bunk and is the answer not in the manual?
Questions and answers