Adding Ip Cameras; Connecting Poc Cameras - HIKVISION HWD-6116MH-G2S Quick Start Manual

3.7 Adding IP Cameras

Purpose
Before you can get live video or record the video files, you should add the network cameras to the connection
list of the device.
Before you start
Ensure the network connection is valid and correct, and the IP camera to add has already been activated. Please
refer to the User Manual for activating the inactive IP camera.
Step 1 Go to Menu > Camera > IP Camera.
Step 2 Select the IP camera from the list and
click to add the camera (with the
same admin password of the DVR's).
Step 3 (Optional) Check Enable H.265 (For
Initial Access) for the connected IP
camera supporting H.265. Then the IP
camera will be encoded with H.265.

3.8 Connecting PoC Cameras

Purpose
Some models support PoC (Power over Coaxitron) cameras connection. DVR will detect the connected PoC
cameras automatically, manage the power consumption via the coaxial communication, and provide power to
the cameras via coaxitron.
Before you start
Connect the PoC camera to the DVR.
Step 1 Go to Menu > Camera > PoC Information.
Step 2 Check the status of connected PoC camera.
:
When the PoC camera is connected to the DVR, the default status is AF.
: If the connected PoC camera supports AT mode and the power of the DVR PoC module is
enough, the DVR will switch the default AF mode to AT mode.
Digital Video Recorder Quick Start Guide
Figure 3-8 PoC Information
10
Figure 3-7 Add IP Camera