HIKVISION HWD-6116MH-G2S Quick Start Manual page 13

Step 2 Check the Enable checkbox to activate the function.
Then the Service Terms interface pops up.
1) Create the verification code and enter the code in
the Verification Code text field.
2) Check the checkbox of The Hik-Connect service will
require internet access. Please read Service Terms
and Privacy Statement before enabling the
service.
3) Scan the QR code on the interface to read the
Service Terms and the Privacy Statement.
4) Click OK to save the settings and return to the
Hik-Connect interface.
 Hik-Connect is disabled by default.
 The verification code is empty when the device leaves factory.
 The verification code must contain 6 to 12 letters or numbers and is case sensitive.
 Every time you enable Hik-Connect, the Service Terms interface pops up and you should check the
checkbox before enabling it.
Step 3 (Optional) Check Custom and enter the Server
Address.
Step 4 (Optional) Check Enable Stream Encryption.
After this feature is enabled, the verification
code is required for remote access and live view.
You can use the scanning tool of your phone to quickly get
the code of the device by scanning the QR code.
Step 5 Click Apply to save the settings.
After configuration, you can access and manage the DVR by your mobile phone on which the
Hik-Connect application is installed or by the website (www.hik-connect.com).
Please refer to the help file on the official website (www.hik-connect.com) and the Hik-Connect Mobile Client
User Manual for adding the device to Hik-Connect and more operation instructions.
Digital Video Recorder Quick Start Guide
12
Figure 3-11 Service Terms
Figure 3-12 Hik-Connect Settings