Table of Contents
Advertisement
Hardware installation
Installing SFP+ transceivers
FortiSwitch-5203B Security System Guide
01-520-145204-20151108
http://docs.fortinet.com/
Before use, the FortiSwitch-5203B module must be correctly inserted into the first or
second hub/switch slot of an Advanced Telecommunications Computing Architecture
(ATCA) chassis such as the FortiGate-5144C, FortiGate-5140B, or FortiGate-5060
chassis.
This chapter describes:
•
Installing SFP+ transceivers
•
Changing FortiSwitch-5203B SW2 switch settings
•
FortiSwitch-5203B mounting components
•
Inserting a FortiSwitch-5203B board
•
Shutting down and Removing a FortiSwitch-5203B board
•
Power cycling a FortiSwitch-5203B board
•
Troubleshooting
The FortiSwitch-5203B board ships with two SR SFP+ transceivers that you must install
to connect the FortiSwitch-5203B front panel fabric or base channel interfaces to a
network. The SFP+ transceivers are inserted into cage sockets numbered F1 to F8 for the
fabric channel or B1 and B2 for the base channel on the FortiSwitch-5203B front panel.
You can install the SFP+ transceivers before or after inserting the FortiSwitch-5203B
board into a FortiGate or other ATCA chassis.
You can install the following types of SFP+ transceivers for connectors F1 to F8:
• SFP+ SR
• SFP+ LR
To install SFP+ transceivers
To complete this procedure, you need:
• A FortiSwitch-5203B board
• Two or more SFP+ transceivers
• An electrostatic discharge (ESD) preventive wrist or ankle strap with connection cord
FortiSwitch-5203B boards must be protected from static discharge and physical shock.
Only handle or work with FortiSwitch-5203B boards at a static-free workstation. Always
wear a grounded electrostatic discharge (ESD) preventive wrist strap when handling
FortiSwitch-5203B boards.
1 Attach the ESD wrist strap to your wrist and to an available ESD socket or wrist strap
terminal.
FortiSwitch-5203B
13
Advertisement
Table of Contents
