fantastic furniture COMO DESK HUTCH Manual page 11

Step 13
You will need
16 x Screws 3 x Plates
(H5) (H6)
4 x Wedges Phillips head
(H7) screwdriver
Insert 4 x Wedges (H7) into the four
corners of the back of the assembled
unit as shown. Secure Wedges (H7)
by tightening 4 x Screws (H5) with the
Phillips Head Screwdriver. To secure
the assembled Como Desk Hutch to
the Como Student Desk place the Hutch
on top of the Desk and align at the back
as shown. Use 12 x Screws (H5) to secure
3 x Plates (H6) with the Phillips Head Screwdriver
to the panels as shown. It is strongly recommended
that you attach the Hutch to your Desk to prevent the unit from toppling.
Step 14
You will need
Phillips head
screwdriver
Wall Screw and Wall Plug
are not provided.
Please use appropriate
fixtures for your wall.
Move the unit into it's final position
and then secure the Brackets (H2) to
the wall. Ensure it is firmly attached. Screw
and wall plug are not provided. Please use
appropriate fixtures for your wall.
* Seek advice from a qualified tradesperson
on how to attach this safety strap to your specific wall.
fantasticfurniture.com.au
(P3)
wall
H2
Wall Screw
H6
H5
H6
H5
(P2)
PAGE 11