Panasonic MC-BJ870-S149 Service Manual page 39

2. Insert a flathead screwdriver or similar tool into the arrow
hooks indicated in the diagram and, using the screwdriver
as a lever to pull the Handle grip unit to the outside,
remove the hooks from the body A unit hook.
■Caution
• The handle grip is held in place by two hooks, on the left
and right. Take care not to break the hooks.
<Precautions when carrying out assembly>
• Take care that the lead wires do not become caught
between the body A unit and the Handle grip unit.
7.1.8. P.C.B B unit
1. Take out the P.C.B B unit from the body A unit and
remove the connectors.
■Caution
• When removing connectors, pull them straight out. If they
are pried out, it may cause a break or poor contact of the
lead wire.
7.1.9. Front body assy
1. Disconnect the Lead wire A assy connector.
2. Remove the Front body assy securing screw on the side
of the connector (1 screw).
39