Reset - Bosch use IP FLEXIDOME IP starlight 6000 VR Installation Manual

24 en | Installation
4.
5.
6.
7.
8.
9.
10. If the camera is correctly focused, briefly press the Menu
11. Briefly press Menu to change the video analog output
12. When the correct format is shown, press Menu for a longer
5.6.2

Reset

Use the factory reset button to restore the unit to its original
settings. Any changes to the settings are overwritten by the
factory defaults. A reset may be necessary, for example, if the
unit has invalid settings that prevent it from functioning as
desired.
2016.06 | v1.0 | AM18-Q0711
To confirm the selected variant, press Menu for a longer
time.
To rotate the image 180°, press and hold Menu until the
image flips.
Briefly press the Menu button to set the start position for
the automatic motorized focus adjustment.
– You will hear the motorized automatic back focus
process running.
– The progress is shown on the monitor.
Briefly press the Menu button again and again to scroll
through the preset zoom positions.
– The selection loops back to the beginning when you
reach the last one.
When you reach the desired zoom position, use a long
press of the Menu button to set the zoom position and to
re-focus.
If the camera is not in focus, press Menu for a longer time
to re-run the auto focus.
button to access the video analog output format screen.
format as required.
period to exit the wizard.
FLEXIDOME IP starlight
6000 VR
Bosch Security Systems