Logging Into The Modem; Wan Setup Configuration; Internet Connection Settings - TPG Netgear Nighthawk D7800 Setup Manual

6. Log in with your Netgear modem username and password.
By default, these are:
Username: admin
Password: password
7. On the home screen, click Advanced.
8. Click Setup.
9. Click WAN Setup.
10. Select Must use Ethernet WAN from the WAN Preference drop-down.
11. Click Apply.
12. Click Basic.
13. Click Internet.
14. Select Australia from the Country drop-down.
15. Select TPG from the ISP drop-down.
16. Click Yes under Does your Internet connection require a login?
17. Select PPPoE (PPP over Ethernet) from the Encapsulation drop-down.
18. Enter your TPG username and password.
19. Leave the other settings as they are and click Apply.
Once you receive notification that your TPG NBN service is active, your Nighthawk D7800
should now be online. If you are still having issues, please call us on 1300 997 271 for
further assistance.
Modem Setup Guide – NBN FTTP
2