Table of Contents
Advertisement
5-4 Setting the Table File
Clicking [Setting the table file] of the setting sub-menu section displays the wizard screen to set the
input/output relations. On this screen, set the input source and output source relations and relating items.
Notice
The setting of input/output relations is to set the relationship between the input and output
representing an event operation to operate the output of certain equipment when the input
condition of the equipment changes.
5-4-1 Selecting the input source
On the [Selection of input source] screen representing the wizard screen for table file setting, select the
object to be used as the input source. On this screen, in order to use it for the input/output relations, input
source candidate is set up.
Figure 5-4. Setting screen to select input source
(1) First, set the desired number of input sources.
*The default value is set to [0]. Settable up to 200. Set it by the
(2) Select the objective input source from the classification 1, 2 and input source columns.
(3) After finishing the setting, click the [Next] button. The next setting screen is displayed.
*Clicking the [Cancel] button returns to the initial setting screen without saving the set detail.
Request
In selecting the input source, you are kindly requested to select the object actually used.
Notice
The objects of input source include the ON/OFF status of air conditioner, the free contact
input of indoor unit and the input of general equipment (For each PLC for general
equipment).
ON/OFF status of air conditioner
Free contact input
General equipment
button operation or numerical input.
: 100 groups
ON/OFF status
: 100 units
4 input external signal
:
32 units
ON/OFF and error status
13
(1)Setting the input
source number
The objective number of input
source can be set up to 200.
(2)Selecting the input
source
Select the objective input source
from the Classification 1, 2 and
input source columns.
[Next] button
For advancing to the next setting
screen
[Cancel] button
For returning to the initial setting
screen without saving set detail
Advertisement
Table of Contents
