Image Of Using Tool - Mitsubishi Electric PAC-YG21CDA Manual

Item
Computer unit
OS
Memory
Screen resolution
Hard disk
Slot
Drive
Others
* Pentium is the trademark or registered trademark of Intel Corporation in the United States of America and other countries,
or its subsidiary.

2-4 Image of Using Tool

By using this table setting tool, the number of G-50A to be controlled, the output signal format, the relationship
between the input and the output, may be set. Save the set content into ATA card, and insert the ATA card to
the sequencer for use.
Table setting tool
Notice
The set content may be saved by the HDD of your PC in addition to the ATA card. Backing
up the set content is strongly recommended.
Table 2-3 Hardware requirement of table setting tool
Pentium ® II 500MHz or faster
Windows ® 2000Pro/XP English version
128Mbyte or more,
(For WindowsXP, recommend 256MByte or more)
1024×768 or more
At least 100 Mbytes of available space
PC card slot
CD-ROM drive (Requires at installing)
Pointing device, such as a mouse
Use the adapter
The following 3 files
will be created:
SET.CSV
PARA.CSV
TABLE.BIN
(ATA card with the setting content written)
PLC
Details
ATA card
(Q2MEM-8MBA)
--- ATA card for which the software of
PAC-YG21CDA is being written
*For the installation method of PAC-YG21CDA, refer to
the installation (setup) manual.
3
Remarks
*Use with ATA card
adapter