Cisco Webex User Manual page 27

Desk camera
Hide thumbs Also See for Webex:
Table of Contents

Advertisement

Use Your Camera with the Camera App
Parameter
Field of view
Brightness
The following table describes the video image parameters available on the Advanced tab.
Table 7: Video Image Settings on the Advanced Tab
Parameter
Auto focus
Auto white balance
Contrast
Saturation
Sharpness
Description
The field of view determines the width of the view that you can see from the
camera. The higher degree you set, the wider the image.
When Best Overview is enabled, the field of view is set to 81. You can't
change it. If you disable Best Overview, the field of view restores to your
last setting.
Default: 81
Options: 65, 70, 75, 81
Adjust the brightness of the camera image to suit the available light.
Drag the slider left to decrease the brightness or right to increase the
brightness.
The camera uses facial detection when it sets the correct auto exposure. But
if your place is brightly backlit or front lit, then it may under or overexpose
your image. Adjust the Brightness setting if you're silhouetted or overexposed
in a video call.
Description
Enables or disables automatic focus.
In autofocus mode, the camera adjusts the lens to focus on the subject within
the camera view.
If the autofocus mode is turned off, you can manually adjust the focus. Drag
the slider left to make the lens focus closer, and right to focus further.
Default: On
Enables or disables automatic white balance.
When auto mode is on, the camera examines the lighting condition and
determines the colors to render the image.
When the auto mode is off, you can use the slider to adjust the white balance
manually and get your intended image colors.
Default: On
If necessary, adjust the contrast value to improve the image clarity.
Drag the slider left to decrease image contrast or right to increase contrast.
A proper saturation setting makes your image look vivid.
Drag the slider left or right to set your desired color tone.
Adjusts the sharpness level. A proper sharpness level renders the image details
clearly. Drag the slider left to smooth the image or right to sharpen the image.
Configure the Video Image Settings
Webex Desk Camera User Guide
21

Advertisement

Table of Contents
loading

Table of Contents