Download Print this page

Cisco Linksys WVC54G Quick Intallation

Wireless-g internet video camera
Hide thumbs Also See for Linksys WVC54G:

Advertisement

Quick Links

®
A Division of Cisco Systems, Inc.
Package Contents
• Wireless-G Internet Video Camera
• Camera Desktop Stand
• Detachable Antenna
• Power Adapter
• Ethernet Network Cable
• Setup CD-ROM with User Guide
(English only)
• User Guide (English only) on CD
• Quick Installation Guides
• SoloLink DDNS Free Trial Card
2
4 ,
GHz
Wireless-G
802.11g
Internet Video Camera
Wireless
Quick Installation
Model No.
WVC54G (UK)
Model No.
Connect the Camera to a Wired
1
Network for Setup
If you want to connect the
NOTE:
Camera to a wireless network for
setup, refer to the User Guide on the
Setup CD-ROM for instructions.
A
Attach the antenna.
B
Connect the included Ethernet
network cable to your router,
switch, or computer.
C
Connect the other end of the
cable to the Ethernet port on
the Camera.
IMPORTANT:
You MUST connect the
Camera to a router, switch, or PC using
an Ethernet network cable BEFORE
C
powering on the Camera. Otherwise, the
Camera will not function.
D
Connect the included power
adapter to the Power port on
the Camera.
E
Plug the power adapter into
an electrical outlet.
The Ready LED flashes while
the Camera is initializing. When
D
the Camera is ready for setup,
the Ready and Ethernet LEDs
are solidly lit.
2
Set up the Video Camera
A
Insert the Setup CD-ROM into
your CD-ROM drive. The Setup
Wizard should run
automatically, and the
Welcome screen should
appear. If it does not, click
Start and then Run. In the field
provided, enter D:\wvc54g.exe
(if "D" is the letter of your CD-
A
ROM drive).
B
Click Setup to begin the setup
process.
C
Make sure the Camera is
properly connected to your
network. Click Next.
D
The screen will display a list of
Wireless-G Internet Video
C
Cameras on your network and
status information. In the
Selection box, click the name
of the Camera you are
currently installing. Click Next.
E
A verify password screen will
appear. In lowercase letters,
enter admin in the
Administrator Name and
Password fields. Click OK.
D
E
F
Enter a unique name for the
Camera in the Camera Name
field, and complete the
Description field. Select your
time zone, and enter the date
and time. Then click Next.
G
If your network has a router or
other DHCP server, select
F
Automatic Configuration-
DHCP . If the Camera requires a
static IP address, keep the
default setting, Static IP
address.
Click Next.
H
If you selected Automatic
Configuration-DHCP in step G,
then proceed to step I.
G
If you selected Static IP
address, the IP Settings screen
will appear. Enter an IP
Address, Subnet Mask, and
Default Gateway appropriate
for your network. You must
specify an IP Address and
Subnet Mask. If you are unsure
about the Default Gateway,
then leave this field blank.
H
Complete the Primary DNS
and/or Secondary DNS fields.
Enter at least one DNS address,
which you can obtain from
your ISP . Click Next.
NOTE:
The default IP address of the
Camera is 192.168.1.115.

Advertisement

loading

Summary of Contents for Cisco Linksys WVC54G

  • Page 1 Connect the Camera to a Wired Set up the Video Camera Network for Setup ® A Division of Cisco Systems, Inc. Enter a unique name for the Insert the Setup CD-ROM into If you want to connect the NOTE: Camera in the Camera Name your CD-ROM drive.
  • Page 2 Camera. Click Add to Linksys is a registered trademark or trademark of the Camera via the Internet. Refer to enhances the security of your and SoloLink is a trademark of Cisco Systems, add the Camera to the Utility’s list. the SoloLink ™...