Advertisement
Step 4
You will need
6 x Cam Bolts
1 x Magnetic
(H3)
(H8)
2 x Medium
Phillips head
Screws (H9)
screwdriver
Step 5
You will need
6 x Cam Nuts
6 x Dowels
(H4)
(H1)
Phillips head
screwdriver
Insert 6 x Dowels (H1) into
Side Panels (P2, P3) and
Divider (P4). Insert 6 x Cam Nuts
(H4) into the holes of Side Panels
(P2, P3) and Divider (P4). Rotate the cam nuts so the arrows point towards the incoming
cam bolts. Attach Top Panel (P1) and tighten the cam nuts.
Step 6
You will need
8 x Wedges
8 x Small Thin
(H10)
Screws (H11)
Phillips head
screwdriver
fantasticfurniture.com.au
H3
H3
H3
Attach 6 x Cam Bolts (H3) into Top Panel (P1).
Attach 1 x Magnetic (H8) to Top Panel (P1) with 2 x Medium Screws (H9).
(P1)
H1
H4
H4
(P2)
(P9)
Secure Back Panels (P8, P9) in place with 8 x Wedges (H10)
using 8 x Small Thin Screws (H11).
H3
H3
H9
(P1)
H8
H1
H4
(P4)
This is how a cam nut works........
(P8)
H3
(P3)
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
H10
H11
Page 6
Advertisement
