Install The Rear Camera - Pioneer VREC-DH300D Owner's Manual

Install the Rear Camera

The top and bottom of the image can be set according to the mounting direction of the rear camera.
"This Product Settings" - "Configurable Features" - "Recording Setting" - "Install Position"
1 Clean the installation area of dirt and oils using the included cleaning cloth.
2 Install the rear camera.
1 : Peel off the double-sided tape release paper from the rear camera.
2 : Adjust the lens so that it faces outside the vehicle, and install at the specified position on the rear
windscreen.
CAUTION
• Make sure that the surface of the rear windscreen is clean and dry, before attaching the rear camera.
• Use extreme care as the double-sided tape on the rear camera is extremely strong, and it will be
difficult to reapply the tape once it has been applied.
• To ensure the installation strength of the adhesive tape, leave this product for 24 hours after application
before using it.
Note
• A protective film is applied to the lens when the product is purchased. Peel off this film.
1
②
Turn this part to adjust.
− 18 −
Firmly push this product.