Install This Product - Pioneer VREC-150MD Owner's Manual

Install this Product

1 Install this product.
1 Using the rubber mounting straps, attach the Dash Camera over the vehicles rear view mirror and
adjust the lens to the desired angle.
2 Insert the USB Cigarette Charger into the vehicle cigarette lighter socket.
3 Insert the Mini USB plug of the power cable into the USB port of the Dash Camera.
4 Connect the plug (2.5mm) of the cable coming from the rear camera to the AV IN port of the main
unit.
5 Connect the red cable of the rear camera to the + 12V terminal of your vehicle reverse light.
CAUTION
• Install firmly so that it does not come off. Incorrect installation may cause this to drop while driving
and cause an accident. Inspect the installation state from time to time.
• Always use the included parts as specified. There is a risk of product failure if other parts are used.
• Ensure the reverse light of your vehicle is + 12V, as some modern vehicles are equipped with LED
rear lights.
Rear Camera Cable
Cigarette lighter
Reverse light +12 В
− 14 −
Rear Camera