Table of Contents
Advertisement
"WAIT COOLING"
Cause:
Solution:
"WASTED INK NEAR FULL"
Cause:
Solution:
"WRONG CARTRIDGE"
Cause:
Solution:
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com
The printhead is hot.
Wait until the message disappears.
The waste ink tank is nearly full.
If the message "Check Printer" has appeared, replace the ink absorbent by
referring to the instructions under ##343 (cause and action under d) of 4.2.2
"Error Codes" in this chapter.
The cartridge isn't installed correctly.
(1) Reinstall the cartridge.
(2) Replace the cartridge.
SmartBase MPC200/imageCLASS MPC200
Chapter 4: Maintenance & Service
4-13
Advertisement
Table of Contents
