Table of Contents
Advertisement
SmartBase MPC200/imageCLASS MPC200
Chapter 2: Technical Reference
3.3 Ink residual quantity detection
The machine is not equipped with a sensor used to detect the level of ink remaining in its tank.
The absence of such a sensor is made up for by counting the dots in a deposit. When these dots reach a
specific number, the LCD will indicate a message alerting the user that the ink is running out and
prompting replacement of the tank, which must be replaced when the output starts to show fuzzy images or
becomes blank.
When the ink tank has been replaced, the LCD indicates a message, asking if the ink tank has been
replaced. Select 'Yes' in response. (Selecting 'No' will do away with resetting the ink counter, which
prevents correct detection of the level of remaining ink.)
The level of remaining ink may be checked by selecting 'INK VOLUME' from a menu.
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com
Approx. 100% to 30% full
Appros. 30% full
0%(empty)
Ink counter not reset
Figure 2-7 Indications of the Ink Level
2-10
Advertisement
Table of Contents
