Table of Contents
Advertisement
SmartBase MPC200/imageCLASS MPC200
Chapter 4: Maintenance & Service
6.2 Service Test Functions
The fax functions for testing individual operations, such as below.
See this chapter 5.2.2 Service data registration/setting method for details of entering the test mode. To
leave the test mode, press the Stop/Reset button, and then ON/OFF button.
6.2.1 Test mode overview
Test mode can be executed by following the menu items from the display.
a) DRAM tests
Writes data to DRAM image storage areas and reads that data to check operations.
b) CS test
CS test is used to enter the contact sensor's shading data.
c) Faculty tests
Test the operation of operation panel and sensor functions.
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com
4-30
Advertisement
Table of Contents
