Table of Contents
Advertisement
SmartBase MPC200/imageCLASS MPC200
Chapter 3: Assembly and Disassembly
Disassembly 3. SPCNT board
(1) Perform disassembly 1 to detach the flat bed assembly.
(2) Disconnect all cables from the SPCNT board.
(3) Remove the 4 screws (a), and detach the SPCNT board.
Disassembly 4. PC-CARD unit
(1) Perform disassembly 2, and detach the Operation panel.
(2) Remove the 2 screws (b), and detach the plate.
(3) Remove the 4 screws (c), and detach the PC-CARD unit.
Grounding plate
PC-CARD unit
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com
b
c
Figure 3-5 Disassembly 3 and Disassembly
a
3-8
SPCNT board
Advertisement
Table of Contents
