Table of Contents
Advertisement
SmartBase MPC200/imageCLASS MPC200
Chapter 4: Maintenance & Service
4.2.2 Error codes
a) Service error code output
If bit4 of service data #1 SSSW SW01 is set to '1', an appropriate service error code will be indicated as
follows in response to an error.
b) Error code countermeasures
The following item c) lists all the error codes that the product can display. As for the causes and
countermeasures, only the error codes which are newly incorporated in the unit a remedies unique to
the product are included in the item d). For the causes and countermeasures of other error codes, refer to
the separate G3 Facsimile Error Code Service Hand Book (Rev. 1) .
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com
TX/RX No.5001
START AGAIN ##334
Figure 4-5 Service Error Code Display
4-14
Display repeated
Advertisement
Table of Contents
