Download Print this page
Graco Fire-Ball 222073 Instructions Manual
Graco Fire-Ball 222073 Instructions Manual

Graco Fire-Ball 222073 Instructions Manual

Topper units

Advertisement

Quick Links

INSTRUCTIONS–PARTS LIST
This manual contains important
warnings and information.
READ AND KEEP FOR REFERENCE.
INSTRUCTIONS
50:1 Fire-BallR, 120-lb Drum Size
Topper Units
Model 222073
Model 241032
Contains CE Installation Kit 240979
Model 241032 shown
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
ECOPYRIGHT 1996, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001
306523
First choice when
quality counts.t
Rev. F
06381A

Advertisement

loading

Summary of Contents for Graco Fire-Ball 222073

  • Page 1 50:1 Fire-BallR, 120-lb Drum Size Topper Units Model 222073 Model 241032 Contains CE Installation Kit 240979 Model 241032 shown 06381A GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441 ECOPYRIGHT 1996, GRACO INC. Graco Inc. is registered to I.S. EN ISO 9001...
  • Page 2 D This equipment is for professional use only. D Read all instruction manuals, tags, and labels before operating the equipment. D Use the equipment only for its intended purpose. If you are not sure, call your Graco distributor. D Do not alter or modify this equipment.
  • Page 3 Installation Note: Choose a location with sufficient overhead Assemble the Pump to the Elevator clearance, and adequate clearance for plumbing when (See Fig. 2) unit is being raised or lowered. 1. Remove the elevator clamp (34) from the elevator bracket (33). Note: Numbers and letters in parenthesis refer to callouts in the Figures and Parts Drawing.
  • Page 4 Operation Changing the Drums WARNING 1. Disconnect the air line coupler (4) from the To reduce the risk of serious injury, always discon- pump. nect air and relieve pressure in lines before at- tempting any service. 2. Open the inductor plate vent, and connect the 1.
  • Page 5 CE Installation Kit 240979 Part No. Description Qty. 156849 NIPPLE 109075 REGULATOR, air, with gauge 103347 VALVE, safety 222011 CLAMP, grounding CE Label Attention: To comply with CE directives, the CE identification label must be affixed to the top of the drum cover.
  • Page 6 Parts Model 222073, Topper Unit (contains items 1, 2, and 4 through 42) Model 241032, Topper Unit with CE Installation Kit 240979 (contains items 1 through 42) Model 241032 shown 06382A 306-523...
  • Page 7 Parts List Model 222073, Topper Unit (contains items 1, 2, and 4 through 42) Model 241032, Topper Unit with CE Installation Kit 240979 (contains items 1 through 42) Ref. Ref. Part No. Description Qty. Part No. Description Qty. 100021 SCREW, hex hd cap; 204121 ELEVATOR, 120 lb 1/4–20 x 1”...
  • Page 8 Graco distributor to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.

This manual is also suitable for:

Fire-ball 241032