Can-I/F Setup; Setting The Default Vehicle Screen; Setting The Climate Interrupt Time; Setting The Parking Sensor Interrupt On/Off - Alpine INE-W987A Owner's Manual

Setting a Default Camera
When connecting an optional Multi View Camera, you can set which
camera image is displayed when you touch the Camera button on the
Menu screen.
Setting item:
Default Camera
Setting contents:
Front / Rear / Side
• The initial setting differs depending on the cameras set to "On" in
"Setting Multi Camera to On/Off. "

CAN-I/F Setup

[CAN-I/F] is selected on the System Setup Menu screen in step 1. See
"System Setup" (page 41).
• CAN I/F BOX should be connected before this operation.

Setting the Default Vehicle Screen

Touch the Menu screen (page 19) to display the Info mode screen, and
then set the following.
Setting item:
Default Vehicle Screen
Setting contents:
Climate / Park sensor / Last mode (Initial setting)
• For details on the Vehicle Info mode screen, see "About Vehicle Interlock
Function" (page 84).

Setting the Climate Interrupt Time

You can set the time displayed in the Climate screen.
Setting item:
Climate screen interrupt time
Setting contents:
None / 5 sec (Initial setting) / 10 sec / Continuous display
None: The Climate screen is not displayed when you adjust the
air conditioner, etc.
5 sec/10 sec*: The screen is displayed for 5 seconds/10 seconds, then
returns to the previous screen.
Continuous The Climate screen is continuously displayed.
display:
* If you set the air conditioner, etc., while the Climate screen is displayed,
the screen will continuously be displayed.
• For details, see "About Vehicle Interlock Function" (page 84).
44
-EN

Setting the Parking Sensor Interrupt On/Off

Set to "On" to display the Parking Assist screen if a vehicle detects an
obstacle.
Setting item:
Parking sensor interrupt
Setting contents:
Off / On (Initial setting)
• For details, see "About Vehicle Interlock Function" (page 84).

Rear Seat Entertainment Setup

[Rear Seat Entertainment] is selected on the System Setup Menu screen
in step 1. See "System Setup" (page 41).
When a Rear monitor equipped with HDMI input is connected to this
unit, change this setting to "On. " You can output images to the Rear
monitor. For details, see "Rear Seat Entertainment Function" (page 18).
Setting item:
Rear Seat Entertainment
Setting contents:
Off (Initial setting) / On
• When this setting is "On, " you can use this unit to switch the
Illumination of a Rear monitor with the Illumination function.
Setting the Rear Seat Entertainment System
Make sure the Rear Seat Entertainment is set to "On" (
Seat Entertainment Setup" (page 44).
Setting item:
Illumination Colour
Setting contents:
Off (Initial setting) / On
• For details on adjusting Illumination, see "Rear Seat Entertainment
Function" (page 18).
• When the Rear Seat Entertainment setting is set to "Off, " you cannot
select this item.
• Set the coordination colour controls on the Rear monitor to "Navi. "
When set to "Rear monitor, " you cannot operate them from this unit.
). See "Rear