Linking The Reader; Link Datalogic Rf Devices To Base; Power Off - Datalogic Gryphon GM44 Series Quick Reference Manual

Linking the Reader

Linking the Reader

Link Datalogic RF Devices to Base

For RF devices, before configuring the interface it is nec-
essary to link the handheld with the base.
To link the handheld and the base, either press the trigger
to wake it, or simply mount into the base to wake up for
operation. If the reader was previously linked to another
base, you must first scan the Unlink bar code before re-
linking to the new base.
Unlink

Power Off

Scan the bar code below to shut off power to the handheld
until the next trigger pull.
PowerOff
20 Gryphon™ I GM44XX