Table of Contents
Advertisement
Message
INSTALL BC21e/20
(Continued)
LINE IN USE
LOAD PAPER
MEMORY FULL
MEMORY FULL
PLEASE WAIT
(two messages toggle)
Troubleshooting
7-12
Error Code
You tried to print a
received black & white
fax, print a report, or
print a black & white
document in memory
with a BC-22e Photo BJ
Cartridge installed.
—
The unit is set for Fax/
Tel Mode and you are
receiving a telephone
call.
—
The multi-purpose tray
is empty.
#037
The unit's memory is
full because it has
received too many
documents, or a very
long or detailed
document.
Memory is full because
you tried to send too
many pages at once, or
a very long or detailed
document.
—
The unit is sending a
document and its
memory is full.
Cause
Remove the BC-22e Photo
BJ Cartridge and install the
BC-21e Color or BC-20
Black BJ Cartridge (see
page 6-16).
Answer the call.
Load paper in the multi-
purpose tray (see page 2-9).
Make sure the stack does not
exceed the paper limit mark
( ). Then press the
Resume
Print out any documents
that are stored in memory
(see page 4-20). Then start
the operation again.
Divide the document and
send each part separately. To
free the unit's memory,
print or delete any faxes in
memory you no longer need
(see page 4-20 and
page 4-23).
If sending a document, the
unit continues to send the
fax as memory becomes
available.
Action
button.
Chapter 7
Advertisement
Table of Contents
