Restore On Ac Power Loss; Resume By Ring - MSI MS-6301 Manual

FAN Duty When Suspend
When system support Hardware monitor Function, you can choose
stop , 25%, 50%, 75%, or Full on control all of FAN at system goes into
suspend mode.
When system contains no Hardware monitor Function, you only can
choose stop or Full on.
Restore on AC/Power Loss
The settings are power on or power off or last status. During power
on, after every AC power loss, the system will be turned on. During power
off, after every AC power loss, the system will be turned off. During last
status, after every AC power loss, whatever the system status, it will be the
same when the AC power returns.

Resume by Ring

During Disabled, the system will ignore any incoming call from the
modem. During Enabled, the system will boot up if there's an incoming call
from the modem.
Note: If you have change the setting, you must let the system boot up until
it goes to the operating system. Then, power off the system. This
function will work the next time you power on.
Resume by LAN
During Disabled, the system will ignore any incoming signal from the
LAN network card. During Enabled, the system will boot up if there's
an incoming signal from the LAN network card.
Note: If you have change the setting, you must let the system boot up until
it goes to the operating system. Then, power off the system. This
function will work the next time you power on.
®
3-16