MSI MS-6301 Manual page 60

Hard Disk Power Down Mode
This option specifies the power conserving state that the hard disk
drive enters after the specified period of hard drive inactivity has expired.
The settings are Disabled, Standby or Suspend. The Optional and Fail-Safe
default settings are Disabled.
Suspend TimeOut (Minute)
This option specifies the length of a period of system inactivity.
When this length of time expires, the computer enters power conserving
state (see the previous page). The settings are Disabled, 1 min, 2 min, 3 min,
4 min, 5 min, 6 min, 7 min, 8 min, 9 min, 10 min, 11 min, 12 min, 13 min, 14 min
or 15 min. The Optimal and Fail-Safe default settings are Disabled.
Power Button Function
During Suspend, if you push the switch once, the system goes into
suspend mode and if you push it more than 4 seconds, the system will be
turned off. During On/Off, the system will turn off once you push the
switch.
Reset Button Control
During Enabled, if system goes into suspend mode, push the Reset
Button will not resume system. During Disabled, you can resume system at
any time. This purpose is prevent Push Reset Button.
Note: If jumper JP1 is onboard. The BIOS will not diplay this item.
Green PC LED Status
This item determines which state the Green PC LED will use. The
settings are Blinking or No Changed or Dual color. During Dual Color, the
Green PC LED will change ites color in suspend mode. During Blinking, the
Green PC LED will blinking LED in suspend mode.During No Changed, the
Green PC LED will always remain lit.
®
3-15