Power Led; Wake Up On Lan; Restore On Ac Power Loss; Irq 8 Break Suspend - MSI MICRO ATX BX11 Manual

Power LED

This item determines which state the Power LED will use. The
settings are Blink, Dual color, and Single color. During blink, the power LED
will blink when the system enters the suspend mode. When the mode is in
Dual Color, the power LED will change its color in suspend mode. Choose
the single color and the power LED will always remain lit.

Wake Up On LAN

To use this function, you need a LAN add-on card which support
power on functions. It should also support the wake-up on LAN jumper
(JWOL1).
Enabled
Disabled
Restore on AC/Power Loss
The settings are power on or last status. During power on, after
every AC power loss, the system will be turned on. During last status, after
every AC power loss, whatever the system status, it will be the same when
the AC power returns.
Note: a. If you set this option to last status, jumper JP1 must be open or
this function will not work.

IRQ 8 Break Suspend

You can Enable or Disable monitoring of IRQ 8 so it does not awaken
the system from suspend mode.
Wake up on LAN supported.
Wake up on LAN not supported.
3-22
®